RUST VETO 211 D is a blend of dearomatised solvent, and
carefully selected performance additives which provide up
to 12 months indoor protection.
RUST VETO 211 D is a premium quality dewatering rust
preventive and exhibits a very thin greasy film, which is
self-healing, resists peeling and cracking, neutralizes
fingerprints and is easily removed if required.
RUST VETO 211 D is effective on ferrous and non-ferrous
metal and is barium free.

RUST VETO 211 D provides long term protection and final
protection, on:

• (semi)-finished automotive and machinery components like valves, gears, camshaft, box, bearing, chains, motor, fasteners, braking system, precision components with highly finished surfaces .
• Phosphated or blackened surfaces by filling the micro porosity.
• Materials and equipment during shipment overseas, when properly packed.

Particularly resisting to carry-over of alkaline grinding coolants, soluble oil emulsions and acidic rinse water atmosphere.

o Economic – Very performing thin film compatible with most of lubricant oil, no need to wash off.
o Economic – Good separation of displaced water, increase bath lifetime, reduce sump clean up frequency
o Operator friendly – dearomatised solvent, No heavy metal such as barium
o Environmentally friendly – Medium flash point which limits evaporation and fire risk
o Quality – Self-healing film which will not crack or flake, resistant to dirt penetration
o Quality – Neutralizing fingerprints in case of accidental bare handling
o Quality – High resistance to carry-over of alkaline grinding fluids in case of aggressive environment
o Quality – High performing chemistry which keep your added value safe and reduce re-work risk

Appearance- clear brown
Specific Gravity- 0.82
Flash Point (°C) closed cup – 67
Viscosity @20°C (cSt)
Film Thickness (μm)- < 1.5

RUST VETO 211 D is used neat as supplied.
For more information please consult our recommendation book and selection guide.

Product is compatible with the full range of Houghton’s portfolio, esp. with the Houghto-Clean for post degreasing when required and most of our metal working fluid (Hocut, Adrana, Macron, Cut-Max, … )
For more information, please contact y our local Houghton Representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life.
Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°( and    40°( unless otherwise specified. Use stock in delivery rotation.