Lubric8 Cool 768 T
01736 757002Lubric8 Cool 768 T Synthetic Water-Mix Grinding Fluid
Lubric8 Cool 768 T is a boron and formaldehyde-free high-performance fully synthetic water-mix fluid specifically designed for the arduous machining of tough ferrous and non-ferrous alloys. It uses the latest water-soluble polymer technology to give superb machining performance and surface finish and is able to replace traditional emulsion-based technology giving a very clean working environment and less drag out on finished components.
Lubric8 Cool 768 T is a low-foaming product that works equally well in soft water areas and is an extremely robust coolant and gives extended service life in the most difficult conditions.
Machining operations Material suitability
Turning, Milling & Drilling Ferrous alloys
Tapping & Threading Aluminium alloys
Reaming And deep hole drilling Yellow metals
Recommended Dilutions
Turning, Milling & Drilling 4-6%
Tapping & Threading 5-7%
Reaming & deep hole drilling 7-10%
Lubric8 Cool 768 T Synthetic Water-Mix Grinding Fluid Product Benefits:
- Secondary amine free
- Boron free
- Biocide free – therefore formaldehyde release biocide-free
- Chlorine free
| Emulsion appearance | Translucent Solution |
| pH at 5% in distilled water | 9.0 |
| IP 287 Corrosion break point | 2.5 |
| Refractometer correction factor | 2.5 |
| Oil Content | Nil |
A separate Material Safety Data Sheet is available for this product.
Additional advice can also be obtained from your local representative.
