A boron-free, high-performance semi-synthetic water mix fluid specifically designed for the machining of tough ferrous and non-ferrous alloys. It contains high levels of chlorine-free lubricity additives making it suitable for the arduous machining of difficult-to-machine materials. Lubric8 Cool HW 7950 is a medium oil-content product and uses a unique combination of esters to give enhanced machining performance.  Lubric8 Cool HW 7950 is designed for use in hard water areas and is a robust coolant giving good service life in the most difficult conditions. It contains high levels of passivation to protect the most sensitive aerospace alloys. 

Machining operations:

Turning, Milling & Drilling

Tapping & Threading

Reaming And deep hole drilling

Material suitability:

Ferrous alloys 

Aluminium alloys 

Yellow metals 

Recommended Dilutions: 

Turning, Milling & Drilling 5-7%

Tapping & Threading 7-9%

Reaming & deep hole drilling 8-12%

Lubric8 Cool HW 7950 Semi Synthetic Soluble Machining Fluid Product Benefits:

• Secondary amine free 
• Boron free 
• Formaldehyde release biocide-free 
• Chlorine free 

HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development. 

Additional advice can also be obtained from your local representative. 

Contact Us 

Product Data Sheet