Lubric8 Cool R-EVO
01736 757002Lubric8 Cool R-EVO Extreme Pressure Semi Synthetic Soluble Cutting Fluid
Lubric8 Cool R–EVO is an extreme pressure semi-synthetic water mix cutting fluid, formulated to give a long predictable sump life. It provides extra performance in medium/severe cutting operations on a wide range of ferrous and non-ferrous metals. The combination of extreme pressure performance and long sump life permits increased machining rates and true cost efficiency.
R–EVO is a formaldehyde release biocide-free, medium oil content semi-synthetic fluid giving a tight milky emulsion for enhanced lubricity in difficult applications. contains chlorine-free lubricity additives which give excellent cutting performance and surface finish and are passivated to minimise staining to sensitive materials such as aluminium alloys or galvanised materials.
Lubric8 Cool R-EVO is very low foaming in use and can be used through spindle coolant systems. It is suitable for use on a variety of steel alloys and can be used for the machining of non-ferrous alloys.
R-EVO is an extremely robust coolant and gives extended service life in the most difficult conditions.
Machining operations:
Turning, Milling & Drilling
Tapping & Threading
Surface & cylindrical grinding
Material suitability:
Ferrous alloys
Aluminium alloys
Yellow metals
Recommended Dilutions:
Turning, Milling & Drilling 4-6%
Tapping & Threading 5-7%
Surface & Cylindrical grinding 3-4%
Lubric8 Cool R-EVO Extreme Pressure Semi Synthetic Soluble Cutting Fluid Product Benefits:
- Designed for extreme pressure use
- Formulated to give a long predicted sump life
- Low foaming
- Can be used through spindle coolant systems
- Excellent cutting performance and surface finish
- Suitable for use on a wide variety of metals
- Very robust giving extended service life in difficult conditions
- Formaldehyde release biocide-free
| Emulsion Appearance | Tight Milky Emulsion |
| pH at 5% in distilled water | 9.3 |
| IP 287 Corrosion Break Point | 2.0 |
| Refractor Correction Factor | 1.0 |
HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development.
Additional advice can also be obtained from your local representative.
