Lubric8 Cool SHDB+ is a traditional milky water mix fluid designed to perform in general-purpose applications with a wide range of material suitability. It is a high-oil-content product and is well suited to the machining of most ferrous and non-ferrous materials.   

This fluid forms a very stable, tight milky emulsion gives good service life in comparison to similar milky formulations and is free from formaldehyde-release biocides. 

Machining operations:

Turning, Milling & Drilling

Tapping & Threading

Material suitability:

Ferrous alloys 

Aluminium alloys 

Yellow metals 

Recommended Dilutions: 

Turning, Milling & Drilling 4-6%

Tapping & Threading 5-8%

Lubric8 Cool SHDB+ Soluble Cutting Fluid Product Benefits:

• Designed for general purpose use and very flexible
• Very robust giving extended service life
• Low foaming
• Suitable for use on a variety of metals
• Formaldehyde release biocide-free 

HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development. 

Additional advice can also be obtained from your local representative. 

Contact Us 

Product Data Sheet