Lubric8 Cut AE 130 is a blend of high-quality solvent refined base stocks together with lubricity agents, chlorinated EP additive and anti-mist additive. The low viscosity of the product reduces drag out, gives rapid penetration to the cutting zone plus provides good heat dissipation by combining higher flow rates with good wetting characteristics.  

AE130 is odourless and light in colour so promotes good visibility of the workpiece. The extreme pressure and lubricity agents combine to give good tool life whilst being non-aggressive to the machine tool itself. The anti-mist additive helps to maintain the working atmosphere around the machine tool. 

Lubric8 Cut AE 130 is a general-purpose product suitable for a wide range of cutting applications such as turning, milling, drilling, sawing and boring on both ferrous and non-ferrous materials. It is non-staining on yellow metals. Lubric8 Cut AE 130 can be used on manually operated, automatic and CNC machine tools. 

Lubric8 Cut AE 130 Extreme Pressure Neat Cutting Oil Product Benefits:

• Effective anti-mist capability 
• Enhances surface finish 
• Extended tool life 
• Light colour 
• Low drag-out 
• Low odour 
• Speed of penetration into the cutting zone 
• Will not stain non-ferrous metals. 

HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development. 

Additional advice can also be obtained from your local representative. 

Contact Us 

Product Data Sheet

Material Safety Data Sheet