Lubric8 Cut AE 200M
01736 757002Lubric8 Cut AE 200M General Purpose Neat Cutting Oil
Cut AE 200M is a chlorine free neat cutting oil developed for use on all ferrous and non-ferrous materials across a wide range of machinery. Typical applications include general machining on bar autos and automatic machines, turning, milling and drilling. Cut AE 200M combines specially selected high performance additives – lubricity esters, phosphorous and anti-misting agents making it suitable for use on all types of ferrous and non-ferrous materials. Cut AE 200M is suitable for use as a lubricating oil where a viscosity of ISO 15 is required. It can be utilised in automatic machines where cross leakage into gearboxes can occur.
Applications:
- Medium duty machining
- Turning
- Milling
- Drilling
- Automatic Machines
- Multi bar autos
- Can perform as a general lubrication product
Lubric8 Cut AE 200M General Purpose Neat Cutting Oil Product Benefits:
- Combines lubricity performance esters.
- Contains anti-mist additive.
- Formulated on high-quality mineral oil.
- Light colour.
- Excellent flushing properties.
- Highly economical – can be recycled.
| Density @ 15°C | 873 Kg/m3 |
| Flash Point | 200 oC |
| Pour Point | -27 oC |
| Viscosity @ 40°C | 15.70 Mm2/s |
| Viscosity @ 100°C | 3.86 Mm2/s |
| Viscosity Index | >140 |
HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development.
Additional advice can also be obtained from your local representative.
