Lubric8 Cut DAS 865A is a light-coloured, heavy-duty neat cutting oil developed for use on cast iron, steel and alloys across a wide range of machinery. 

The formulation combines specially selected high-performance additives – active sulphur EP, chlorinated EP, lubricity and anti-mist, making it suitable for use on all types of ferrous materials. This medium viscosity product ensures rapid penetration to the cutting tool/workpiece zone to provide maximum flushing of swarf and chippings. 

Use as supplied. Applications include high-speed machining on bar autos and automatic machines gun drilling, deep hole boring, hobbing, broaching and thread cutting on all ferrous materials. Due to the active sulphur content this product is not recommended for use on non-ferrous/yellow metals. 

Lubric8 Cut DAS 865A Extreme Pressure/High-Speed Neat Cutting Oil Product Benefits:

• High EP and lubricity 
• Contains non-corrosive chlorinated additives, active sulphurised EP and anti-friction additives 
• Intermediate viscosity 
• Low drag out 
• Extends tool-life 
• Based on high-quality mineral oil of low aromatic content 
• Good rationalisation product, but not for use on yellow metals 
• Suitable for heavy-duty tapping, broaching and deep-hole drilling 

HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development. 

Additional advice can also be obtained from your local representative. 

Contact Us 

Product Data Sheet

Material Safety Data Sheet