Lubric8 Cut EDM 1
01736 757002Lubric8 Cut EDM 1 Dielectric Coolant
Lubric8 Cut EDM 1 is based on a ‘narrow cut’ Paraffinic Mineral Oil with an extremely low aromatic carbon content. This highly refined dielectric coolant is recommended as a dielectric fluid in electrical discharge machining. The low viscosity of promotes excellent flushing and swarf clearance between the component material.
Fine spark erosion machining operations especially in small EDM machines.
Lubric8 Cut EDM 1 Dielectric Coolant Product Benefits:
- Low odour
- High oxidation stability
- Low viscosity for fine surface finish
| Appearance: | Colourless |
| Kinematic Viscosity @ 40℃: | 1.75 |
| Kinematic Viscosity @ 15℃: | 0.79 |
| Flash Point (oC) | 78 |
| Pour Point (oC) | -45 |
HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development.
Additional advice can also be obtained from your local representative.
