Lubric8 Cut M298-32
01736 757002Lubric8 Cut M298-32 Neat Cutting Oil
Lubric8 Cut M298-32 is a neat cutting oil blended from solvent-refined mineral oil using selected additives and affording a high level of lubricity.
Suitable for machining a wide range of materials in various applications, including deep hole boring, broaching, H.D. tapping, threading and gear cutting. Formulated to protect against staining of yellow metals.
Lubric8 Cut M298-32 Neat Cutting Oil Product Benefits:
- Enhanced lubricity promotes superior metal wetting and improved surface finish on machined parts.
- Good workpiece visibility.
- Low oil mist levels.
- Promotes extended tool life.
- Chlorine-free formulation.
| Appearance: | Amber Fluid |
| Kinematic Viscosity @ 40℃: | 28-35 cSt |
| Kinematic Viscosity @ 15℃: | 0.878 |
| Ester | Yes |
| Active Sulphur | Yes |
| Chlorine | No |
HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development.
Additional advice can also be obtained from your local representative.
