Total HBF 4 OEM+

Total HBF 4 OEM+ DOT4 Synthetic Fluid for Brake Systems

Hydraulic Synthetic fluid recommended for brake circuits and clutch systems in all vehicles using synthetic fluid and requiring DOT 4 level. Miscible with other synthetic fluids of chemical type such as DOT 3, DOT 4 and DOT 5.1. Not miscible with mineral base fluids of LHM type or silicon-based fluids. Very high dry and wet boiling points adjusted to ever increasing  temperatures encountered in braking systems : prevents from “vapour lock”.Resistant to moisture absorption.Viscosity suitable at cold as well as high temperatures.Provides corrosion protection for metals used in braking systems : cast iron, aluminium, steel, copper, brass etc.Compatible with rubber seals and hoses.

Total HBF 4 OEM+ Synthetic Brake Fluid Advantages:

• Very high dry and wet boiling points adjusted to ever-increasing temperatures encountered in braking systems
• Prevents “vapour lock”
• Resistant to moisture absorption
• Viscosity is suitable at cold as well as high temperatures
• Provides corrosion protection for metals used in braking systems: cast iron, aluminium, steel, copper, brass etc
• Compatible with rubber seals and hoses.

Please refer to the Products Data Sheet

Health & Safety:

Please refer to the relevant health and safety data sheet, a copy of which is freely available to all our customers.

Storage:

All packages should be stored under cover. Where outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60°C or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet

Safety Data Sheet