Total QUARTZ INEO RCP 5W-30
01736 757002VISCOSITY - SAE 5w-30
Total QUARTZ INEO RCP 5W-30 Engine Oil
Total Quartz Ineo RCP 5W-30 is a high-tech, advanced synthetic engine oil offering exceptional performance in protection against wear and deposits. Via a close collaboration between the technical teams at Stellantis and TotalEnergies Lubrifiants, the Quartz Ineo RCP 5W-30 is officially approved by Stellantis FPW9.55535/03.
Recently introduced for the 1.5 BlueHDi (DV5R) diesel engines manufactured before February 2023, the Quartz Ineo RCP 5W-30 is now also applicable for the 1.2L PureTech (EB Turbo Euro 6.1) gasoline engines, as well as all Stellantis engines requiring a high-performance lubricant with FPW9.55535/03 approvals (refer to maintenance plans).
The Quartz Ineo RCP 5W-30 is also perfectly suited for gasoline and diesel engines requiring PSA B71 2290 & PSA B71 2297 approvals for hot climates. With the Quartz Ineo RCP 5W-30, approved and recommended by Stellantis, keep your engine younger, longer!
Total Quartz Ineo RCP 5W-30 Engine Oil Advantages:
- Outstanding protection against wear: The outstanding technology of this product makes it an optimal choice in terms of robustness and provides complete protection for the pistons, rings and liner.
- High resistance to LSPI (Low Speed Pre-Ignition): Specially formulated to prevent damage, CO2 and pollutant emissions caused by LSPI.
- Longer service life for particulate filter: Maximises the efficiency of particulate filters (DPF, GPF), preventing them from getting clogged up prematurely.
- Optimum protection against engine contamination: The detergent and specific dispersive additives provide the engine with optimum protection against wear and prevent the formation of soot and sludge deposits.
| Properties | Method | Units | Total Quartz Ineo RCP 5W-30 |
| Viscosity grade | SAE J300 | – | 5W-30 |
|
Kinematic viscosity at 40°C |
ASTM D445 | mm²/s | 66.3 |
|
Kinematic viscosity at 100°C |
ASTM D445 | mm²/s | 11.31 |
|
Density at 15°C |
ASTM D1298 | kg/m3 | 847 |
|
Viscosity index |
ASTM D2270 | – | 170 |
|
Pour Point |
ASTM D97 | °C | -42 |
| OC Flash point | ASTM D 92 | °C | 254 |
International classifications
Manufacturers specifications
RECOMMENDATIONS FOR USE
Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out in accordance with the manufacturer’s recommendations.
The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent the product’s label from rubbing off.
HEALTH, SAFETY AND THE ENVIRONMENT
Based on the toxicological information available, this product should not cause any adverse health effects, provided it is used for its intended purpose and in accordance with the recommendations laid out in the Safety Data Sheet (SDS). This product should not be used for any purposes other than the ones for which it is intended.
Request a quote for this product
"*" indicates required fields