Total Rubia CF 2 40
01736 757002VISCOSITY - SAE 40
Total Rubia CF 2 40 - Monograde engine oil for two-stroke diesel engines
- Good antiwear and anticorrosion properties.
- Excellent anti-oxidation properties allowing long time idle or very severe working conditions of the engine (hot climates, heavy load…).
- Low ash value ensures good engine cleanliness.
- Very high detergency and dispersancy level.
This lubricant is suitable for all two-stroke Diesel engines when API CF-2 or API CD II specifications are required. Rubia CF-2 40 has been especially developed for the lubrication of two-stroke Detroit Diesel engines. It can also be used in old diesel engines of service vehicles.
- Good anti-corrosion and anti-rust properties
- Very good resistance to oxidation, allowing the protection of engines used at idle or in very severe operating conditions (hot climate, high loads…)
- Low ash content ensures a good state of cleanliness of the engine
- Highly effective detergent and dispersant additives.
| Name | Method | Units | Total Rubia CF 2 40 |
| Kinematic Viscosity @ 40°C | ASTM D445 | mm²/s | 145.9 |
|
Kinematic Viscosity @ 100°C |
ASTM D445 | mm²/s | 14.5 |
|
Viscosity Index |
ASTM D2270 | 98 | |
|
Pour Point |
ASTM D97 | °C | -39 |
|
T.B.N |
ASTM D2896 | mg KOH/g | 7.1 |
|
Flash Point |
ASTM D93 | °C | 230 |
|
Ash, Sulphated |
ASTM D874 | % w t | 1.05 |
International Standards:
API CF-2/CF MIL-L-46152B
Meets the requirements of:
Detroit Diesel: Oil types 1 and 2 for series: 53, 71, 92, 110 and 149 marine
RECOMMENDATIONS FOR USE
Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out in accordance with the manufacturer’s recommendations.
The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent the product’s label from rubbing off.
HEALTH, SAFETY AND THE ENVIRONMENT
Based on the toxicological information available, this product should not cause any adverse health effects, provided it is used for its intended purpose and in accordance with the recommendations laid out in the Safety Data Sheet (SDS).
This can be obtained on request from your local reseller and is available for consultation at https://ms-sds.totalenergies.com.
This product should not be used for any purposes other than the ones for which it is intended.
Request a quote for this product
"*" indicates required fields