Total Rubia Optima 3500 FE 5w-30

GET A QUOTE BUY ONLINE

VISCOSITY - SAE 5w-30

Total Rubia Optima 3500 FE 5w-30 - Synthetic low-SAPS engine oil with fuel economy technology

DESCRIPTION

Total Rubia Optima 3500 FE 5W-30 is a fully synthetic new generation lubricant based on the latest API CK-4 specification. It’s fitted for most of the international trucks & buses engine manufacturers, including all European Euro 6 applications (Daimler, Volvo, Scania, MAN, Iveco, DAF ). It is also compatible with certain gas engines.

With its “low-SAPS” (Low Sulphated Ash, Phosphorus and Sulphur) technology, Rubia Optima 3500 FE 5W-30 is specifically adapted to the latest generation of diesel engines equipped with post-treatment systems, such as diesel particulate filters (DPFs).

Total Rubia Optima 3500 FE 5W-30 is especially suitable for IVECO Euro 6 vehicles with extended oil drain intervals as defined by the manufacturer and has the approvals of MAN M 3677 and Scania LDF-4.

Suitable for their Euro 6 engines.

TECHNOLOGY

Inno-Boost technology

Ready for the next chapter of engine technology. SUITABLE FOR FPT IVECO CATEGORY TLS E6 With the Inno-Boost Technology, formulations incorporate the right combination of strong anti-oxidant molecules. These active molecules inhibit radical formation and keep the hydrocarbon chains intact. As a result, the engine oil viscosity remains stable and keeps its properties for a longer time.

APPLICATIONS

Suitable for their Euro 6 engines.

ADVANTAGES

Total Rubia Optima 3500 FE 5W-30 is a fully synthetic engine oil advantages:

Its Fuel Economy technology helps to save 1% fuel on average, compared to a SAE 40 grade reference lubricant. This value can reach 3% if used in combination with Fuel Economy transmission lubricants Rubia Optima 3500 FE 5W-30 exhibits exceptional thermal stability, enables easier cold start and helps to reach extended oil drain intervals.
The advanced Low SAPS formulation of Rubia Optima 3500 FE 5W-30 helps to prevent the clogging of the diesel particulate filter and extends the post-treatment system durability.

TYPICAL CHARACTERISTICS

Name	Method	Units	Total Rubia Optima 3500 5w-30
Kinematic Viscosity @ 40°C	ASTM D445	mm²/s	72.5
Kinematic Viscosity @ 100°C	ASTM D445	mm²/s	12.2
Viscosity Index	ASTM D2270		166
Pour Point	ASTM D97	°C	-42
T.B.N	ASTM D2896	mg KOH/g	13
Sulphated Ash	ASTM D874	% w/w max	0.95
Flash Point	ASTM D92	°C	223

ADDITIONAL INFORMATION

RECOMMENDATIONS FOR USE

Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out in accordance with the manufacturer’s recommendations.

The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent the product’s label from rubbing off. HEALTH,

SAFETY AND THE ENVIRONMENT

Based on the toxicological information available, this product should not cause any adverse health effects, provided it is used for its intended purpose and in accordance with the recommendations laid out in the Safety Data Sheet (SDS).

This can be obtained on request from your local reseller and is available for consultation at https://ms-sds.totalenergies.com.

This product should not be used for any purposes other than the ones for which it is intended

Contact Us

Product Data Sheet

Safety Data Sheet