Total Traxium Gear 8 75w-80

VISCOSITY - SAE 75w-80

Total Traxium Gear 8 75w-80 Transmission Oil

DESCRIPTION

Traxium gear 8 75W-80 is an oil specially designed for the lubrication of manual gearboxes of passenger cars. It is especially recommended for PSA manual gearboxes, with extended drain interval (250,000 km) and friction modifier additive adapted to PSA manual gearboxes.

TECHNOLOGY

Savings technology Reduces your maintenance costs.

With Savings technology, you will contribute over time to reduce your maintenance costs as your vehicle will run with fewer interruptions. Our products offer a robust and consistent protection of your parts in all conditions, by offering performances that meet your needs in terms of reliability. Our oils are formulated to comply with multiple applications using different materials and operating under different conditions due to the protective film that is applied to the parts with powerful and long-lasting properties.

APPLICATIONS

Total Traxium Gear 8 75w-80 is specially recommended for PSA manual gearboxes, with extended drain
interval (250,000 km) and friction modifier additive adapted to PSA manual gearboxes.

ADVANTAGES

Total Traxium Gear 8 75w-80 Transmission Oil Product Advantages:

Reduced cost of maintenance: specially formulated to reach the drain intervals recommended by the manufacturer.
Improved protection of manual gearbox against wear and corrosion due to extreme-pressure properties of oil.
Improved driver start-up experience: low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption.
Improved stability in operation due to high viscosity index
High compatibility with oil filters due to antifoam properties

TYPICAL CHARACTERISTICS

TYPICAL CHARACTERISTICS	UNITS	METHODS	Value
Volumetric mass at 15°C	kg/m 3	DIN 51757 D	887
Viscosity at 40°C	mm 2 /s	ASTM D445	49
Viscosity at 100°C	mm 2 /s	ASTM D445	8
Viscosity index	–	ASTM D2270	137
Viscosity Brookfield at -40°C	mPa/s	–	104000
Flash point	°C	ASTM D92	208
Pour point	°C	ASTM D97	-45

APPROVAL & PERFORMANCE CLAIMS

INTERNATIONAL STANDARDS
 API GL-4

MANUFACTURER APPROVALS
 PSA PEUGEOT CITROEN B71 2330

ADDITIONAL INFORMATION

Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet

Safety Data Sheet