Total Aero XPD 80 is an ashless dispersive monograde oil made from a mineral base. The Total Aero range of oils has been specially developed for use at engine oil in piston-engine aircraft to prolong engine life and increase engine efficiency.

The AERO XPD range of oils already contains an anti-wear additive, the same as TEXTRON Lycoming LW 16702. By using TOTAL AERO XPD, it is not necessary to add this additive to the oil.

• Lubrication of aircraft piston engines operating under severe and very severe conditions when an oil containing a dispersant additive is required.
• After long storage, we recommend shaking the product before using it.

Total Aero XPD 80 Ashless Monograde Mineral Oil for Piston Engine Aircraft Advantages:

• New generation lubricants were specially developed to improve anti-wear and corrosion protection of aviation piston engines.
• Contains anti-wear additives.

• Density at 15 °C – 877kg/m³
• Kinematic viscosity at 40 °C – 123 mm²/s
• Kinematic viscosity at 100 °C – 15.1 mm²/s
• Viscosity index  – 129
• Flash point Open Cup – 286℃
• Pour point –  -27℃

AERO XPD oils meet the following specifications and technical instructions:

• SAE J-1899
• LYCOMING SI 1014M, SI 1409C, SB 446E, SB 471B
• CONTINENTAL MOTORS SIL16-2, M-0
• FAA AD 08-04-03.

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet