Castrol Alpha VT 32
01736 757002VISCOSITY - ISO 32
Castrol Alpha VT 32 Turbo transmission oil
Castrol Alpha™ VT 32 has been developed specifically for Voith Turbo transmissions to provide long service life and realibility, and to exceed the Voith specification 3.90-8e_2011-07
Castrol Alpha VT 32 is formulated for hydrokinetic transmissions used mainly in railway locomotives. Other applications include trucks and heavy off-highway equipment incorporating this type of transmission unit. The oil is also suitable for conventional industrial gearboxes where a low-viscosity oil is suitable. This oil provides higher load-carrying performance, together with excellent oxidation resistance, anti-corrosion and minimal foaming.
Alpha VT 32 is fully compatible with nitrile, silicone and fluropolymer seal materials.
Castrol Alpha VT 32 meets the requirements of:
Voith Turbo Specification 3.90-8e_2011-07
- Long service life
- Excellent load carrying and micropitting resistance
- Good seal compatibility
- Low foam and rapid air release
- Excellent demulsification
| Name | Method | Units | Alpha VT 32 |
| Density @ 15°C / 59°F
|
ISO 12185, ASTM D4052 | kg/m³ | 870 |
| Kinematic Viscosity @ 40°C / 104°F
|
ISO 3104, ASTM
D445 |
mm²/s | 32 |
| Kinematic Viscosity @ 100°C / 212°F
|
ISO 3104, ASTM
D445 |
mm²/s | 5.4 |
| Viscosity Index
|
ISO 2909, ASTM
D2270 |
None | 105 |
| Pour Point
|
ISO 3016, ASTM
D97 |
°C/°F | -42 / -44 |
| Flash Point – open cup method
|
ISO 2592, ASTM
D92 |
°C/°F | 234 / 453 |
| Water Separation @ 54°C / 129°F (40/37/3)
|
ISO 6614, ASTM
D1401 |
minutes | 5 |
| Air Release @ 50°C / 122°F
|
ISO 9120, ASTM
D3427 |
minutes | 4 |
| Foam Sequence I – tendency / stability
|
ISO 6247, ASTM
D892 |
ml / ml | 0 / 0 |
| Foam Sequence II – tendency / stability
|
ISO 6247, ASTM
D892 |
ml / ml | 10 / 0 |
| Foam Sequence III – tendency / stability
|
ISO 6247, ASTM
D892 |
ml / ml | 0 / 0 |
| Rust test – synthetic seawater (24 hrs)
|
ISO 7120, ASTM
D665B |
– | Pass |
| FZG Gear Scuffing test – A/8.3/90 | ISO 14635-1 | Failure Load Stage | >12 |
| FZG Gear Scuffing test – A/16.6/90 | ISO 14635-1 | Failure Load Stage | 12 |
| FZG Micropitting test @ 90°C/194°F
|
FVA 54/1 | Failure Load Stage / Micropitting
Rating |
>10 (high) |
| FE-8 Bearing Wear test (F.562831.01-
7.5/80-80) |
DIN 51819-3 | Roller wear (Mw50), mg | < 10 |
The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
