Castrol Alphasyn T 10
VISCOSITY - ISO 10
Synthetic gear oil
Castrol Alphasyn T 10 synthetic lubricant is based on polyalpha-olefin (PAO) fluids and sulphur/phosphorus
antiwear additive technology providing outstanding thermal stability and good load carrying capacity.
Alphasyn T 10 has been formulated for use in spindle and central lubrication systems with high thermal loads. It
has a very low pour point and excellent viscosity/temperature characteristics.
The outstanding oxidation and thermal stability of Alphasyn T 10 allows oil change intervals to be extended in
circumstances where extreme temperatures result would result in a short service if conventional mineral oil based
lubricants were used. This allows cost savings to be made by reducing the level of maintenance required.
Alphasyn T 10 is fully compatible with nitrile, silicone and fluropolymer seal materials.
• Good thermal and oxidative stability provides reliable operation and extended operating life when compared to
mineral oil based products.
• Inherently high viscosity index makes the product suitable for operations operating over a wide temperature
• Good water separation and demulsification characteristics means reduced down time through prolonged
lubricant life and increased equipment reliability.
• PAO based lubricant provides good compatibility with seals, paints and mineral oil based lubricants.
|Operating temperature||Max. 110°C|
|Viscosity||10 mm/s² at 40°C|
|Product type||Lubricating Oils|
|Applicable to these sectors||Aerospace, Automotive Manufacture, Machinery, Metal Goods, Metals, Mining, Power Generation|
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid
horizontally to avoid the possible ingress of water and the obliteration of drum markings. Products should not be
stored above 60°C, exposed to hot sun or freezing conditions.