Castrol Alphasyn T 32
VISCOSITY - ISO 32
Synthetic gear & hydraulic lubricant
The Castrol Alphasyn™ T gear oil range of synthetic lubricants are based on polyalpha-olefin (PAO) fluids and sulphur/
phosphorus antiwear additive technology to provide outstanding thermal stability and good load carrying capacity.
Alphasyn T grades have been formulated for use in most types of light to medium duty enclosed gear systems but should
not be used for heavy / shock loaded systems. Alphasyn T is also suitable for the lubrication of bearings and circulatory
systems operating at high temperatures and various high temperature applications such as in hydraulic systems and for
the lubrication of large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent
viscosity/temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T
range are fully compatible with nitrile, silicone and fluropolymer seal materials.
Alphasyn T is classified as follows:
DIN Classification CL
Alphasyn T grades meet the requirements of:
- DIN 51517 Part 2
- David Brown Type A
- Good thermal and oxidative stability provides reliable operation and extended operating life when compared to
mineral oil based products.
- Inherently high viscosity index makes the product suitable for operations operating over a wide temperature range.
- Good antiwear and load carrying abilities minimises gear wear and prolongs gear tooth life.
- Good water separation and demulsification characteristics promote reduced down time through prolonged
lubricant life and increased equipment reliability.
- PAO base fluid provides good compatibility with seals, paints and mineral oil based lubricants.
|Operating temperature||Max. 110°C|
|Viscosity||32 mm/s² at 40°C|
|Product type||Lubricating Oils|
|Applicable to these sectors||Aerospace, Automotive Manufacture, Machinery, Metal Goods, Metals, Mining, Power Generation|
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to
avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60°C,
exposed to hot sun or freezing conditions.