Total Altis MV 2
01736 757002VISCOSITY - ISO 160
Total Altis MV 2 High-Temperature High-Speed Extreme Pressure Polyurea Grease
Total Altis MV 2 High-Temperature High-Speed Extreme Pressure Polyurea Grease which is primarily suited to extended lubrication intervals for applications which are running under severe conditions.
Typical applications include ventilator bearings, anti-friction bearings, roller and needle bearings, steering systems and industrial roller bearings on the dry section of a paper mill.
This lubricant can be used in all types of industrial bearings working under normal to severe high-temperature conditions, medium to high rotational speeds, and medium to high loads.
- ALTIS MV 2 is pre-eminently suitable for extended lubrication intervals for applications running under severe conditions.
- Typical applications are ventilator bearings, anti-friction bearings, roller and needle bearings, steering systems and industrial roller bearings on the dry section of a
paper mill. Can be used in all types of industrial bearings working under normal to severe high-temperature conditions, medium to high rotational speeds, and medium to high loads. - Always avoid contamination of the grease by dust and/or dirt when applying.
Preferably use a pneumatic pump system or cartridges.
Total Altis MV 2 High-Temperature High-Speed Extreme Pressure Polyurea Grease Advantages:
- Allows long re-lubrication intervals.
- Very good stability in application and in storage.
- Can be easily pumped and injected.
- Very good adhesion to metals.
- Excellent antirust and anticorrosion properties.
- Excellent thermal stability is linked with excellent reversibility.
- ALTIS MV 2 does not contain lead, or other heavy metals considered harmful to
human health and the environment.
- Soap/thickener – Polyurea
- NLGI grade – 2
- Color – Green
- Appearance – Buttery
- Operating temperature range °C -20 to 160
- Penetration at 25°C – 0.1 mm – 265-295
- Oil separation 168 hrs. at 40°C – % mass <1
- Bearing behavior 10.000rpm/149°C – Hrs. >1200
- Anti-rust performance SKF- EMCOR – rating 0-0
- Dropping point IP 396/NF T 60 102 C °C >240
- Kinematic viscosity of the base oil at 40°C – mm²/s (cSt) 160
- Four ball EP weld load – kg > 400
- ISO 6743-9: L-XBEEB 2
- DIN 51502: KP2P -20
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
