Total Altis SH 2
01736 757002VISCOSITY - ISO 80
Total Altis SH 2 High-Temperature, High-Speed Extreme Pressure Synthetic Polyurea Grease
Total ALTIS SH 2 is a top-of-the-range synthetic grease designed for factory fill and sealed-for-life applications. Also suitable for lubrication of bearings, slides, racks subjected to high temperatures in dry and mildly humid environments, bearings of electric motors, generators, bearings of dryers, pumps, oven conveyors, and all other applications where rotation speeds and temperatures are high and/or low.
- ALTIS SH 2 is a top-of-the-range synthetic grease designed for factory fill and sealed-for-life applications.
- Also suitable for lubrication of bearings, slides, racks subjected to high temperatures in dry and mildly humid environments, bearings of electric motors, generators, bearings of dryers, pumps, oven conveyors, and all other applications where rotation speeds and temperatures are high and/or low.
- Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.
Total Altis SH 2 High-Temperature, High-Speed Extreme Pressure Synthetic Polyurea Grease Advantages:
- Excellent durability and stability when subjected to a mechanical shearing force.
- Very good stability in application and in storage.
- Can be easily pumped and injected.
- Outstanding high and/or low-temperature behaviour.
- Very good adhesion to metals.
- Excellent antirust and anticorrosion properties.
- Excellent thermal stability is linked with excellent reversibility.
- ALTIS SH 2 does not co
| TYPICAL CHARACTERISTICS | METHODS | UNITS | ALTIS SH 2 |
| Soap/thickener | – | Polyurea | |
| NLGI grade | ASTM D 217/DIN 51 818 | – | 2 |
| Colour | Visual | – | Pale yellow |
| Appearance | Visual | – | Smooth |
| Operating temperature range | ° C | -40 to 180 | |
| Penetration at 25°C | ASTM D 217/DIN51 818 | 0.1 mm | 265-295 |
| Flow pressure 1400 mbar | DIN 51 805 | °C | – 43 |
| Bearing behaviour 10.000rpm/149°C | ASTM D 3336 | Hrs | > 2000 |
| 4 ball EP | ASTM D 2596 | Kgf | > 315 |
| Anti-rust performance SKF- EMCOR | DIN 51 802/IP220/NFT 60-135/ISO 11007 | rating | 0-0 |
| Dropping point | IP 396/NF T 60 102C | °C | >260 |
| Kinematic viscosity of the base oil at 40°C | ASTM D 445/DIN 51 562-1/ISO 3104/IP71 | mm²/s (cSt) | 80 |
| FAG-FE9 6000/1.5/170 °C | DIN 51821 | Hrs F10/F50 | > 400 |
- ISO 6743-9: L-XDFEB 2
- DIN 51502: KP2R- 40
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
