Total Azolla ZS 10
01736 757002VISCOSITY - ISO 10
Total Azolla ZS 10 Supreme Performance Anti-Wear Hydraulic Oil
Total Azolla ZS 10 is an extremely high-performance anti-wear hydraulic oil. This lubricant is designed for use in all kinds of hydraulic systems running under the most difficult conditions, such as in machine tools, mould injection machines, presses and other industrial or mobile equipment. Also used in many other applications, where a universal high-performance anti-wear lubricant is the first choice: low-charged gears, sliding and roller bearings, air compressors, servomotors and control systems equipped with fine filtration systems.
- Designed for use in all kinds of hydraulic systems running under the most difficult conditions, such as in machine tools, mould injection machines, presses and other industrial or mobile equipment.
- Also used in many other applications, where a universal high-performance antiwear lubricant is the first choice: low-charged gears, sliding and roller bearings, air compressors, servo-motors and control systems equipped with fine filtration systems.
Total Azolla ZS 10 Supreme Performance Anti-Wear Hydraulic Oil Advantages:
- High protection against wear ensuring maximum equipment life.
- Superior thermal stability avoiding the formation of sludge even at high temperatures.
- Very good oxidation stability ensures a long service life of the fluid.
- Remarkable filterability even in the presence of water.
- Excellent hydrolytic stability avoiding filter blocking.
- Excellent protection against rust and corrosion.
- Good anti-foam and air release properties by using silicon-free components.
- Good demulsibility ensures rapid water separation
- Reduced maintenance and operating costs.
| TYPICAL CHARACTERISTICS | METHODS | UNITS | AZOLLA ZS 10 |
| Appearance (visual) | Internal | – | Clear liquid |
| Density at 15 °C | ISO 3675 | kg/m3 | 846 |
| Viscosity at 40°C | ISO 3104 | mm²/s | 10 |
| Viscosity at 100°C | ISO 3104 | mm²/s | 2.6 |
| Viscosity index | ISO 2909 | – | 100 |
| Cleveland flash point | ISO 2592 | °C | 170 |
| Pour point | ISO 3016 | °C | -33 |
| Filterability 0.8 µ without water | NF E 48-690
| Index (IF)
| 1 |
| Filterability 0.8 µ with water | NF E 48-691
| Index (IF) | – |
- AFNOR NF E 48-603 HM
- ISO 6743/4 HM
- DIN 51524 P2 HLP
- CINCINNATI MILACRON P68, P69, P70
- VICKERS M-2950S, -I-286
- DENISON HF0, HF1, HF2 (T6H20C)
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
