Castrol Braycote 194
Corrosion Preventive Compound Solvent Cutback
Castrol Braycote™ 194 is a dark brown, liquid corrosion preventive compound intended for indoor exposure. It is a
solvent cutback material designed for cold application, and dries in approximately two hours, leaving a firm, amber,
transparent film that will not flow below 175°F (80°C).
Braycote 194 is designed to protect unpainted metal surfaces from the effects of indoor or shed exposure for periods up
to one year. It is non-corrosive and readily wets the surfaces of commonly used metals, leaving a continuous film after
evaporation of the solvent. This product may be applied by spray, dip or brush. A gallon will cover approximately 300 to
1,600 square feet, leaving a film 1 to 4 mils thick, depending upon method of application and surface geometry. Optimal
performance can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill
scale. It is recommended that the metal substrate and ambient temperature be 50-95°F (10-35°C) at the time of product
application.
Operating temperature | Min. -40°C Max. 177°C |
---|---|
Oil type | PFPE |
Thickener | PTFE |
Food grade | No |
Product type | Greases |
Applicable to these sectors | Aerospace, Chemicals |
Removal
Braycote 194 can be removed from exposed surfaces by vapor degreasing, hot caustic, steam, or petroleum solvents.
Specification
Braycote 194 meets the requirements of and is qualified to MIL-PRF-16173E, Class I, Grade 4.