Total Caloris MS 23
01736 757002VISCOSITY - ISO 500
Total Caloris MS 23 High Temperature Clay Grease
DESCRIPTION
Total Caloris MS 23 is a high-temperature bentone clay grease with molybdenum disulfide. This is a performance grease which has been specially adapted to suit high temperatures, low speeds, and heavy loads and a risk of shocks. With excellent mechanical stability and superior resistance to high loads and repeated shock loading due to the presence of Molybdenum disulfide.
This lubricant also offers very good anti-wear properties as well as resistance to mild alkaline and acidic solutions.
APPLICATIONS
- Lubrication of slow moving mechanisms subjected to very high temperatures and repeated shocks. The presence of molybdenum disulfide will guarantee good lubrication, and avoid any jamming or sticking.
- Allows peak temperatures up to 220°C, provided that the period of operation at this temperature is limited and that the equipment is re-greased frequently.
- Total CALORIS MS 23 grease offers the possibility of working in a corrosive atmosphere due to its resistance to mild alkaline and acidic solutions.
- Always avoid contamination of the grease by dust and/or dirt when applying.Preferably use a pneumatic pump system. It is recommended to clean all components before using CALORIS MS 23 and to avoid any mixture/dilution of the grease with conventional greases.
ADVANTAGES
Total Caloris MS 23 High Temperature Clay Grease Advantages:
- Excellent mechanical stability.
- Excellent resistance to high loads and repeated shock loading due to the presence
of Molybdenum disulfide. - Very good anti-wear properties
- Resistant to mild alkaline and acidic solutions
TYPICAL CHARACTERISTICS
| TYPICAL CHARACTERISTICS | METHODS | UNITS | CALORIS MS 23 |
| Soap/thickener | – | Bentone | |
| NLGI grade | ASTM D 217/DIN 51 818 | – | 2/3 |
| Color | Visual | – | Anthracite |
| Appearance | Visual | – | Smooth/ Buttery |
| Operating temperature range | °C | -15 to 160 | |
| Penetration at 25°C | ASTM D 217/DIN51 818 | 0.1 mm | 250-280 |
| Dropping point | IP 396/NFT 60102 C | °C | infusible |
| Kinematic viscosity of the base oil at 40°C | ASTM D 445/DIN 51 562-1/ISO 3104/IP71 | mm²/s (cSt) | 500 |
APPROVAL & PERFORMANCE CLAIMS
- ISO 6743-9: L-XAEEA 2/3
- DIN 51502: MF2/3P – 15
ADDITIONAL INFORMATION
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
PACK SIZES AVAILABLE
24 x 450g