Castrol EDGE Supercar 5w-50
VISCOSITY - SAE 5w-50
Castrol EDGE Supercar 5w-50 Boosted with TITANIUM FST - Strength for Maximum Performance
Over the past 10 years, supercar engine pressures have almost doubled. Generating phenomenal amounts of horsepower, nothing tests the engine and ultimately the oil like a supercar.
Castrol EDGE Supercar 5w-50 is boosted with TITANIUM FST is proven and tested in supercars, the pinnacle of automotive engineering, and is suitable for use in high-performance cars.
Castrol EDGE SUPERCAR is the ultimate proof that Castrols’ oils are tested to the limits, making them ready to perform however the engine and driver demands.
Castrol EDGE SUPERCAR 5W-50 is the only oil recommended for the FORD GT supercar and is approved for use in vehicles where the manufacturer requires a product that Meets
Ford WSS-M2C931-C. It has been exclusively developed for the FORD GT supercar but is also suitable for use in other performance cars.
Castrol EDGE SUPERCAR 5W-50 is suitable for use in vehicles where the manufacturer recommends an API SN 5W-50 lubricant.
Please refer to your owner’s handbook.
Castrol EDGE SUPERCAR 5W-50, boosted with TITANIUM FST gives you the confidence to demand maximum engine performance from supercars, sports cars, competition and the latest technology high powered engines which operate under higher pressures requiring an oil with outstanding strength and performance credentials.
Castrol EDGE SUPERCAR Engine Oils Offer:
- Maximizes short and long-term engine performance
- Reduces engine deposits to help maximize engine response
- Delivers outstanding levels of protection across a variety of engine speeds, conditions and temperatures
- Sustains maximum performance even when under pressure
- Delivers very strong low-foam performance
- Proven and tested in world-leading supercars
* Compared to the limit in the ASTM D 6593 Seq VG test
Name | Method | Units | Castrol EDGE SUPERCAR 5W-50 |
Density @ 15C, Relative | ASTM D4052 | g/ml | 0.87 |
Viscosity, Kinematic 100C | ASTM D445 | mm²/s | 17.2 |
Pour Point | ASTM D97 | °C | -39 |
Viscosity, CCS -30C (5W) | ASTM D5293 | mPa.s (cP) | 6100 |
Viscosity, Kinematic 40C | ASTM D445 | mm²/s | 114 |
Viscosity Index | ASTM D2270 | None | 170 |
Ash, Sulphated | ASTM D874 | % wt | 1.0 |
Flash Point, PMCC | ASTM D93 | °C | 210 |
API SN
Meets Ford WSS-M2C931-C
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.