Total Dynatrans FR
01736 757002VISCOSITY - SAE 80
Total Dynatrans FR Transmission Lubricant For Wet Disk Brakes and Hydraulic Systems
TOTAL DYNATRANS FR is dedicated to the lubrication of mechanical transmissions requiring an API GL-4 product with SAE 80W or 20W-30 viscosity.
This lubricant is suitable for:
- Hydraulic lift, servo, transmission and steering systems
- Power-take-offs
- Driving axles equipped with wet brakes
Total Dynatrans FR Transmission Lubricant Advantages:
- Suitable for a wide range of agricultural machinery and public works equipment
- Simplifies maintenance management
- Used in heavy work conditions or in case of vibration phenomena during braking
| TYPICAL CHARACTERISTICS | METHODS | UNITS | |
| Kinematic Viscosity at 40°C
| ASTM D445 | mm²/s | 84 |
| Kinematic Viscosity at 100°C
| ASTM D445 | mm²/s | 10.5 |
| Viscosity Index | ASTM D2270 | – | 108 |
| Pour Point | ASTM D97 | °C | -27 |
INTERNATIONAL STANDARDS
- API GL-4
MEETS THE REQUIREMENTS OF
- CLAAS / RENAULT AGRICULTURE
- MASSEY FERGUSON CMS M1135/M1141
- FORD WSS-M2C86B / WSS-M2C86C
- NEW HOLLAND NH 420A
SUITABLE FOR
- KOMATSU
- JCB
- MANITOU
Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out in accordance with the manufacturer’s recommendations. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
