Castrol EDGE Professional A3 0w-40
VISCOSITY - SAE 0w-40
Fluid TITANIUM - Stronger Under Pressure
Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient,
without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense
pressures cause friction, which can waste up to 10% of an engine’s performance.
Castrol EDGE Professional is micro-filtered and certified CO2 Neutral according to the highest global standard*. Its
patented Fluid TITANIUM transforms to be stronger under pressure and reduces friction for maximum engine
performance when you need it most.
Castrol EDGE Professional with Fluid TITANIUM: unlock the true performance of your engine.
* in accordance with the BSI PAS 2060 specification
Castrol EDGE Professional A3 0W-40 is suitable for use in automotive gasoline and vehicles where the manufacturer
recommends: ACEA A3/B4, A3/B3, API SN/CF or earlier specification 0W-40 lubricant.
Castrol EDGE Professional A3 0W-40 is approved for use in vehicles from leading manufacturers, please refer to your
owners handbook and the specifications section.
Castrol EDGE Professional A3 0W-40 with Fluid TITANIUM is the natural choice for drivers who demand maximum
engine performance from today’s sophisticated vehicles requiring a high level of protection and higher performance oils.
Castrol EDGE Professional A3 0W-40:
- Transforms to be strongest when the pressure is highest, protecting your engine
- Reduces power-robbing friction across engine speeds and conditions
- Independently tested at the highest standards for proven performance
- Recommended by world-leading car manufacturers
- Protects the engine for the entire drain interval even under extreme pressure
- Delivers high levels of fuel efficiency and low temperature performance
|Name||Method||Units||Castrol EDGE Professional A3 0W-40|
|Density @ 15C, Relative||ASTM D4052||g/ml||0.844|
|Viscosity, Kinematic 100C||ASTM D445||mm²/s||13.2|
|Viscosity, CCS -35C (0W)||ASTM D5293||mPa.s (cP)||5600|
|Viscosity, Kinematic 40C||ASTM D445||mm²/s||74|
|Viscosity Index||ASTM D2270||None||181|
|Pour Point||ASTM D97||°C||-57|
|Flash Point, PMCC||ASTM D93||°C||209|
|Ash, Sulphated||ASTM D874||% wt||1.13|
ACEA A3/B3, A3/B4
Meets – Ford WSS-M2C937-A
MB-Approval 229.3/ 229.5
VW 502 00 / 505 00
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to
avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed
to hot sun or freezing conditions.