Total Fluide XLD FE
VISCOSITY - ISO 35
Extra Long Drain Automatic Transmission Fluid
DESCRIPTION
APPLICATIONS
- New generation automatic transmission fluid based on an advanced synthetic technology allowing extra-long drain and very high performance needed for the demanding requirements of modern heavy duty automatic gearboxes.
- Is particularly recommended for use on heavy duty automatic transmissions (found on buses, refuse trucks, utility vehicles etc.) manufactured by Voith and ZF requiring maximal drain intervals.
- Can be used in:
- Asian step-automatic transmissions requiring strong antishudder durability, including following OEMS: Nissan (Matic D,J,K), Mazda (M-III, M-V), Honda (Z-1), Toyota (T-IV, JWS3309), Hyundai, Kia, Mitsubishi (SP-II / SP-III).
- For the lubrication of materials used in Public Works or Quarries.
ADVANTAGES
- Outstanding oxidation and thermal stability resulting in lower deposit and harmful acidic by-product
formation, for a maximal drain interval capability. - Very stable viscosity profile, even under very severe constrains of shear, to ensure adequate lubrication all
over time. - Excellent filterability allowing the reduction of filter change intervals, thus reducing operating costs.
- Great foaming resistance for optimal lubrication condition and hydraulic efficiency
- Very good protection against wear corrosion
- Superior friction stability, to maintain and excellent shifting quality over a very long time.
- Improved anti-wear technology compared to previous ATF technologies, for a better protection of components under the continuously increasing load constrains and a maximal efficiency of power transmission for better fuel economy.
- Very good seal compatibility preventing oil leakages.
- Enhanced friction modifiers improving driver comfort with smooth, efficient and no-shudder shifting.
TYPICAL CHARACTERISTICS
TYPICAL CHARACTERISTICS | UNITS | METHODS | Value |
Colour | – | ASTM D1500 | Red |
Density at 15°C | kg/m3 | ASTM D4052 | 850 |
Kinematic Viscosity at 40 °C | mm2/s | ASTM D445 | 33,93 |
Kinematic Viscosity at 100°C | mm2 /s | ASTM D445 | 7,155 |
Brookfield Viscosity at -40°C | cP | ASTM D2983 | 11000 |
Viscosity Index | – | ASTM D2270 | 183 |
Pour Point | °C | ASTM D97 | -45 |
Flash Point | °C | ASTM D92 | 212 |
APPROVAL & PERFORMANCE CLAIMS
Before using the product, it is important to check the service manual of the vehicle: the drain is carried out according to the manufacturer’s requirements.
The product should not be stored at a temperature above 60 °C while avoiding exposure to strong sunlight, extreme cold or high temperature variations.
All packages should be protected from bad weather conditions. Otherwise, the drums should be stored horizontally to avoid a possible contamination by water and the damage of the product label.
ADDITIONAL INFORMATION
208 Litre, 20 Litre, 18×1 Litre
PACK SIZES AVAILABLE
20L
208L