Agricultural Transmission & Gear Oil

Total Fluidmatic DCT MV

VISCOSITY - ISO 36

FLUIDMATIC DCT MV

DESCRIPTION
APPLICATIONS
  • FLUIDMATIC DCT MV is a dual clutch transmission fluid based on an advanced synthetic technology which covers 95% of the wet and dry clutch DCT market.
  • FLUIDMATIC DCT MV is suitable for service fill in the following vehicles brands :
    – German OEM : Volkswagen / BMW / Mercedes / Porsche / Smart
    – Asian OEM : Mitsubishi
    – European OEM : Renault / Volvo
    FLUIDMATIC DCT MV contains the latest shear stable viscosity modifier technology allowing a very high
    performance
ADVANTAGES
  • Exceptional shear stability: FLUIDMATIC DCT MV has been formulated to provide very high performance for shear stability, critical for maintaining film thickness enabling robust protection for gears and bearings for the duration of the recommended oil intervals.
  • Outstanding friction durability: FLUIDMATIC DCT MV demonstrated an outstanding improvement in friction durability, meaning it continues to provide the required friction response over time allowing drain intervals to be extended
  • Excellent seal compatibility: FLUIDMATIC DCT MV technology performed ideally by meeting the most severe requirements of the seals testing
  • Superior anti-shudder durability: FLUIDMATIC DCT MV demonstrated an outstanding improvement in friction durability, meaning it continues to provide the required friction response over time allowing drain intervals to be extended
  • Excellent protection: FLUIDMATIC DCT MV shows superior protection against wear and tear also under high stress working conditions
TYPICAL CHARACTERISTICS
TYPICAL CHARACTERISTICS UNITSMETHODS Value
ColourASTM D1500Red
Density at 15°Ckg/m3ASTM D4052854
Kinematic Viscosity at 40 °Cmm2/sASTM D44536,78
Kinematic Viscosity at 100°Cmm2 /sASTM D4457,316
Brookfield Viscosity at -40°CcPASTM D298311700
Viscosity IndexASTM D2270176
Pour Point°CASTM D97-48
Flash Point°CASTM D92204
APPROVAL & PERFORMANCE CLAIMS

Before using the product, it is important to check the service manual of the vehicle: the drain is carried out according to the manufacturer’s requirements.

The product should not be stored at a temperature above 60 °C while avoiding exposure to strong sunlight, extreme cold or high temperature variations.

All packages should be protected from bad weather conditions. Otherwise, the drums should be stored horizontally to avoid a possible contamination by water and the damage of the product label.

ADDITIONAL INFORMATION

18×1 Litre

Total Fluidmatic DCT MV dual clutch and transmission fluid
PACK SIZES AVAILABLE

Request a quote for this product