AQUACUT 9/7 is a moderate oil content, chlorine-free blend of surface active and hydrodynamic lubrication additives, providing an effective alternative to the use of neat oils when machining resistant materials such as high chromium and nickel steels, nimonic alloys and all grades of aluminium on arduous machining operations such as heavy stock removal machining, drilling, tapping and broaching.
AQUACUT 9/7 provides a clean working environment and long sump life due to its modern stable formulation and has been specifically formulated to provide the highest degree of foam resistance when used in high volume coolant delivery systems especially in soft water areas. These features improve the operator working environment and remove the need for ‘post machining cleaning’ operations, as is the case with neat cutting oils.

AQUACUT 9/7 is a mineral oil based cutting fluid, with a boron amine package. It suits well for machining of cast iron, steel and yellow metals as well as aluminium alloys containing up to 18% silicium. High stock removal turning & milling, deep hole drilling & boring, screw cutting, reaming, gear cutting, broaching.

o Greatly improved tool life and surface finish:
o Permits higher cutting speeds:
o Highest degree of foam resistance in high volume coolant delivery systems:
o Exceptional stable formulation for extended sump life:
o Multi-Metal capability, including high duty steels and aluminiums:
o Can replace neat oils in many operations:
o Excellent operator acceptability:
E Good EHS profile: free of boron and formaldehyde releaser biocide, free of chlorine

• Concentrate Appearance –  Hazy amber oil
• Specific Gravity@ 20°c –  0.97
• Refractometer Factor –  1.0
• Emulsion Appearance –  Opalescent
• pH in Use –  9, 1

Majority of operations 6-8%

Water soluble coolants are complemented by our full range of high quality, speciality production fluids including energy saving wash chemicals , low misting neat cutting oils, non­voe rust preventives and long life heat treatment fluids. Fluidcare services complete our value added portfolio with a range of expert services and equipment to help reduce costs and improve productivity. For more information, please contact your local Houghton representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost Recommended storage temperature is usually between 5°C and 40°C unless otherwise specified. Use stock in delivery rotation.

Safety data sheets are available in accordance with Regulations (EC) No 1907 /2006 Annex II and (EC) No 1272/2008.