CUT-MAX BR 500 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces
CUT-MAX BR 500 contains active sulphur and may discolour yellow metals. The oil is chlorine free

CUT-MAX BR 500 is used for the broaching of steel, as e.g conneting rods or steering racks. The oil is also recommended for deep drilling operation with BTA or Ejector tools.
CUT-MAX BR 500 provides long tool life for all severe machining operations.

o Increased productivity – high removal rates
o Reduced cost – energy saving
o Reduced cost – clean machines
o Reduced cost – less disposal frequency

• Colour – brown
• Specific Gravity @ 20 ℃ kg/m³ – 900
• Kinetic Viscosity@ 40°C, mm²/s – 18
• Flash Point COC ℃ – 185
• Pour Point °C  – n.d.
• Copper Corrosion  – 4a

CUT-MAX BR 500 is used neat as supplied.

For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°C unless otherwise specified. Use stock in delivery rotation.

Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.

185 Kg