CUT-MAX CF 13 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces
CUT-MAX CF 13 contains active sulphur and may discolour yellow metals. The oil is chlorine free

CUT-MAX CF 13 is suitable for gun drilling applications typically with 5-20mm diameter holes and ferrous materials
CUT-MAX CF 13 has multi-function ability and is also suitable for vertical broaching of steels at speeds up to 12 metres per minute. Other typical applications include gear cutting.

o Increased productivity – high removal rates
o Increased productivity – long tool life
o Reduced cost – energy saving

• Colour – yellow
• Specific Gravity @ 20℃  kg/m³  – 880
• Kinetic Viscosity@ 40°C, mm²/s  – 13
• Flash Point COC ℃ – 160
• Pour Point °C  – -16
• Copper Corrosion – 4c

CUT-MAX CF 13 is used neat as supplied.

For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°C unless otherwise specified. Use stock in delivery rotation.

Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.