Quaker Houghton Cut-Max SE 100
Quaker Houghton Cut-Max SE 100 Neat Oil for Spark Erosion
CUT-MAX SE 100 is based on aliphatic hydrocarbons with very low content of aromatics for improved working conditions. High dielectric strength and special semi conductor additives contribute to a high removal capacity.
CUT-MAX SE 100 can be used with all standard electrode materials such as copper or graphite.
CUT-MAX SE 100 is a universal spark erosion oil which shows very good results with both rough and fine machining. Even in very small erosion slots, the product shows a good flushing performance.It also performs well in EDT machines for roller texturizing
CUT-MAX SE 100 achieved excellent results with the eroding of nickel alloy turbine blades where reduction of cycle time of >30% has been shown versus both conventional EDM oils as well as synthetic ones.
Product has Rolls Royce CSS 142 approval
o Increased productivity – high removal rates
o Reduced cost – long sump life
o Secure handling – high EHS standard
o Secure handling – clean working environment
- Colour – colourless
- Specific Gravity@ 20 °C kg/m³ – 800
- Kinetic Viscosity @ 40°C, mm²/s – 2.8
- Flash Point COC °C – 109
- Pour Point ℃ – -20
- Copper Corrosion – 1a
CUT-MAX SE 100 is used neat as supplied.
For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.
Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°( and 40°( unless otherwise specified. Use stock in delivery rotation.
Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.
For further information on this product or current substitutes, please Contact Us.