Quaker Houghton Drawsol 1050 E
Soluble Cold Deformation Oil
DRAWSOL 1050 E is an emulsifiable metalforming lubricant based on severely hydrotreated oil technology and is free from chlorine, sulphur, glycol ether and diethanolamine.
DRAWSOL 1050 E is a high lubricity product based on polar additives giving excellent performance in a range of ferrous and non-ferrous stamping and blanking operations. It is free from Chlorine and active Sulfur.
DRAWSOL 1050 E can be used neat or diluted with water and can be applied by immersion, spray or roller. Best results can be obtained in soft water.
DRAWSOL 1050 E is used in a wide range of ferrous and non-ferrous forming operations. It is s easily removed by use of alkaline cleaners.
o Reduced cost – higher production rates due to strong lubricity
o Reduced cost – clean workshop environment due to less oil mist and evaporation
o Satisfied staff – good EHS profile, reduced smell and oil mist
o Simplified storage – versatile product for majority of operations in the workshop.
- Colour – dark amber
- Specific Gravity@ 20 °C kg/m133 – 940
- Kinematic Viscosity@ 40°C, mm²/s – 130
- Flash Point COC ℃ – n.d.
- Pour Point ℃ – -6
- Copper Corrosion – 1b
DRAWSOL 7 050 E is used neat as supplied or diluted with water in concentration between 5 and 20%
For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective.
For more information, please contact your local Houghton representative.
Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost Recommended storage temperature is usually between 5°C and 40°( unless otherwise specified. Use stock in delivery rotation.
Safety data sheets are available in accordance with Regulation (EC) No 1907 /2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67 /548/EEC or 1999/45/EC.