FENELLA FLUID D 2628 is an ester based water soluble oil for drawing operations and contains special EP lubricity additives and corrosion inhibitors.
FENELLA FLUID D 2628 is free of bactericide and fungicide. It is also free from Chlorine.

FENELLA FLUID D 2628 is a soluble oil which can be used for extreme drawing operations.
FENELLA FLUID D 2628 has extremely high EP and lubricity properties, so high alloyed steels and stainless steels can be worked

o Reduced cost – higher production rates due to strong lubricity
o Reduced cost – clean workshop environment due to less oil mist and evaporation
o Satisfied staff – good EHS profile, reduced smell and oil mist
o Reduced cost – easy to be washed off with standard cleaners

• Colour  – brown
• Specific Gravity@ 20 °C kglm133  – 980
• Kinematic Viscosity @ 40°(, mm2/s  –  410
• pH@5%  – 8.4
• Corrosion protection Note 0@ % – 5
• Refractometer factor  – 1.0

For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective.
For more information, please contact your local Houghton representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°( unless otherwise specified. Use stock in delivery rotation.

Safety data sheets are available in accordance with Regulation (EC) No 1907 /2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67 /548/EEC or 1999/45/EC.