RUST VETO 100 D is a blend of mineral oil. and carefully selected performance additives which provide up to 6 months indoor protection.
RUST VETO 100 D is a premium quality dewatering rust preventive and exhibits a very thin oily film, which is self­healing, resists peeling and cracking, neutralizes fingerprints and is easily removed if required.
RUST VETO 100 D is effective on ferrous and non-ferrous metal. It contains oils with a very low level of PCA, exceeding regulation expectation, and is barium free.

RUST VETO 100 D provides medium term protection, inter-operational and final protection, on :

o (semi)-finished automotive and machinery components like valves, gears, camshaft, box, bearing, chains, motor, fasteners, braking system, precision components with highly finished surf aces …
o Phosphated or blackened surfaces by filling the micro porosity.
o Finely machined or ground metal surfaces such as valves, rollers and fasteners.
o Steel tubes after pickling and washing processes, thank to its good penetration into bundle.

Dewatering applications in areas where the use of flammable solvents is prohibited.
The residual thin oily film don’t need to be removed before assembly in most case and it can act to enhance lubrication properties in the deformation and manipulation process for light applications.

o Economic – Solvent free technology, avoid CAPEX investment in solvent vapour collection and treatment
o Economic – Very performing thin film compatible with most of lubricant oil, no need to wash off.
o Operator friendly – High flash points and low volatility to minimize fire risk in application transportation and storage.
o Operator friendly – No heavy metal such as barium
o Quality – Neutralizing fingerprints in case of accidental bare handling
o Quality – High performing chemistry which keep your added value safe and reduce re-work risk

• Appearance – clear yellow to orange
• Specific Gravity – 0.82
• Flash Point (°C) open cup – 138
• Viscosity @40°C (cSt) – 6
• Film Thickness (µm) – <2

RUST VETO 100 D is used neat as supplied.
For more information please consult our recommendation book and selection guide.

Product is compatible with the full range of Houghton’s portfolio, esp. with the Houghto-Clean for post degreasing when required and most of our metal working fluid (Hocut, Adrana, Macron, Cut-Max, … )
For more information, please contact your local Houghton Representative.

Please refer to section 7 of Safety Data Sheets tor handling and storage information, including product shelf I if e. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°C unless otherwise specified. Use stock in delivery rotation.

Safety data sheets are available in accordance with Regulation (EC) No 1907 /2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67 /548/E EC or 1 999/4 5/E C.