Lubric8 Cool BR 7950 is a high-performance semi-synthetic water mix fluid specifically designed for the arduous machining of tough ferrous and non-ferrous alloys. Lubric8 Cool BR 7950 is a medium oil-content product and uses a unique combination of chlorine-free lubricity additives to give superb machining performance on a wide variety of hard-to-machine materials from titanium, nickel alloys and stainless steels to aluminium alloys and yellow metals. The ester-based additive pack gives excellent performance and surface finish across all typical machining applications such as turning and milling but also when sawing, tapping, reaming and deep hole drilling.  

Lubric8 Cool BR 7950 is an extremely low foaming product and performs well in through spindle and high coolant volume delivery applications. Lubric8 Cool BR 7950 is an extremely robust coolant and gives extended service life in the most difficult conditions.  

Material suitability 

• Ferrous alloys 
• Aluminium alloys 
• Titanium 
• Nickel alloys 
• Yellow metals 

Machining operations & recommended dilutions  

Turning, Milling & Drilling @ 4-7%  

Sawing, Tapping & Threading @ 6-9%  

Reaming & Deep Hole Drilling @ 7-10%    

Lubric8 BR 7950 Semi Synthetic Soluble Cooling Fluid Product Benefits:

• Secondary amine free 
• Boron free 
• Formaldehyde release biocide-free 
• Chlorine & Sulphur free 
• Non-staining on aluminium alloys & yellow metals.

HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development. 

Additional advice can also be obtained from your local representative. 

Contact Us 

Product Data Sheet