Neat Cutting Oil

Lubric8 Cut M402-12

Lubric8 Cut M402-12 Neat Cutting Oil


Lubric8 Cut M402-12 is a technically advanced neat cutting and grinding fluid formulated using an advanced synthetic ester to provide enhanced polar lubrication that also includes extreme pressure additives to further improve product performance.  

This technology has been designed specifically for use in arduous metal cutting and grinding applications where fluid performance can achieve significant improvements in tool life and surface finish.  

The use of high-viscosity hydro-cracked base stocks, advanced lubricity esters and phosphorous additives combine to achieve a high flash point, increased performance and long service life. The low viscosity also provides excellent flushing, penetration and filterability characteristics and due to its low volatility and wetting properties reduces product consumption over conventional oils. 


Used as received for machining and grinding medium to high tensile steel, yellow metals, aluminium alloys and stainless steel. Especially suited for high-speed sliding heads and multi-slide machines. As the product is formulated using high viscosity index base oils the product can also be used as a lubricating oil where a viscosity of ISO 10-22 is required and therefore can be utilised in automatic machines where cross leakage into gearboxes can occur.  


Lubric8 Cut M402-12 Neat Cutting Oil Product Benefits:

  • Hydro-cracked base with a very high flash point greatly reduces the risk of fire in the event of a tool crash. 
  • The synthetic ester formulation greatly assists the dispersal of heat away from the machine tool. 
  • Chlorine-free, non-active EP additive package. 
  • Extended tool life increases cutting speed and improves productivity. 
  • Compatible for use with yellow metals without staining. 
  • Good workpiece visibility. 
  • Excellent operator acceptability, low misting. 


Appearance: Water White
Kinematic Viscosity @ 40: 12 cSt
Copper Corrosion Test: 1a
Flashpoint: > 2000C
Specific Gravity @ 150C:0.838
Odour: Low

HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development. 

Additional advice can also be obtained from your local representative. 

Contact Us 

Product Data Sheet

Material Safety Data Sheet


Lubric8 Cut M402-12 Neat Cutting Metalworking Oil

Request a quote for this product