Neat Cutting Oil

Lubric8 Cut R-EVO

Lubric8 Cut R-EVO Soluble Cutting Oil


Lubric8 Cool REVO is an extreme pressure semi-synthetic water mix cutting fluid, formulated to give a long predictable sump life. It provides extra performance in medium/severe cutting operations on a wide range of ferrous and non-ferrous metals. The combination of extreme pressure performance and long sump life permits increased machining rates and true cost efficiency.

Lubric8 Cool REVO is a formaldehyde release biocide-free, medium oil content semi-synthetic fluid giving a tight milky emulsion for enhanced lubricity in difficult applicationscontains chlorine-free lubricity additives which give excellent cutting performance and surface finish and is passivated to minimise staining to sensitive materials such as aluminium alloys or galvanised materials. Lubric8 Cool R-EVO is very low foaming in use and can be used through spindle coolant systems. It is suitable for use on a variety of steel alloys and can be used for the machining of non-ferrous alloys.

R-EVO is an extremely robust coolant and gives extended service life in the most difficult conditions. 


Machining operations

Turning, Milling & Drilling

Tapping & Threading

Surface & cylindrical grinding


Material suitability

Ferrous alloys

Aluminium alloys

Yellow metals


Recommended Dilutions

Turning, Milling & Drilling 4-6%

Tapping & Threading 5-7%

Surface & Cylindrical grinding 3-4%


Lubric8 Cut R-EVO Soluble Cutting Oil Product Benefits:

  • Provides a long predictable sump life
  • Extreme pressure performance
  • Formaldehyde release biocide-free
  • Chlorine-free
  • Excellent cutting performance and surface finish
  • Minimises risk of staining
  • Low foaming
  • For use on ferrous and non-ferrous alloys
  • Extended service life
  • Can be used through spindle coolant machines

Emulsion appearance in 50ppm water                Tight Milky Emulsion 

pH at 5% in distilled water                                                 9.3 

IP 287 Corrosion break point                                            2.0 

Refractometer correction factor                                        1.0 


HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development. 

Additional advice can also be obtained from your local representative. 

Contact Us 

Product Data Sheet

Material Safety Data Sheet


Lubric8 Cut REVO Neat Cutting Metalworking Oil

Request a quote for this product