Castrol Magnatec 5w-30 C2
01736 757002VISCOSITY - SAE 5w-30
Castrol Magnatec 5w-30 C2 Protection Against Stop-Start Wear
Today even a normal driver can stop and start as many as 18,000 times a year. And all that idling in traffic or waiting at junctions causes microscopic wear in your engine. In the latest industry test, Castrol MAGNATEC STOP-START 5W-30 C2 gives significantly less wear in STOP-START operation.
Castrol MAGNATEC STOP-START incorporates intelligent molecules that cling, and form a self-healing layer so it’s always ready to protect at each of the critical stages of stop-start driving. Essentially it provides instant protection for your engine from the moment you start and throughout all the stop-sarts in your journey.
As tested in the industry OM646LA test
Castrol MAGNATEC STOP-START is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C2 or API SN 5W-30. It is also suitable for use in Peugeot and Citroen vehicles that require a 5W-30 lubricant approved to PSA B71 2290 specification and Fiat vehicles that require a 5W-30 lubricant that Meets Fiat 9.55535-S1 specification.
Contains intelligent molecules that:
- Cling to engine parts when the oil drains down
- Form a self-healing layer to protect at each of the critical stages of stop-start driving and beyond
- Are proven to reduce wear in stop-start operation
| Name | Method | Units | Castrol MAGNATEC 5W-30 C2 |
| Density @ 15C, Relative
|
ASTM D4052 | g/ml | 0.849 |
| Viscosity, Kinematic 100C
|
ASTM D445 | mm²/s | 10.3 |
| Viscosity, CCS -30C (5W)
|
ASTM D5293 | mPa.s (cP) | 4300 |
| Viscosity, Kinematic 40C
|
ASTM D445 | mm²/s | 57 |
| Viscosity Index
|
ASTM D2270 | None | 170 |
| Pour Point
|
ASTM D97 | °C | -44 |
| Flash Point, PMCC
|
DIN EN ISO 2592 | °C | 225 |
| Ash, Sulphated | ASTM D874 | % wt | 0.60 |
ACEA C2 PSA
Approval B71 2290
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
