Castrol Magnatec Stop-Start 5w-30 C3
VISCOSITY - SAE 5w-30
CLINGING MOLECULES PROTECT AGAINST STOP-START WEAR
Today even a normal driver can stop and start as many as 18,000 times a year. And all that idling in traffic or waiting at junctions causes microscopic wear in your engine. In the latest industry test, New Castrol MAGNATEC STOP-START 5W-30 C3 gives significantly less wear in stop-start operation.
New Castrol MAGNATEC STOP-START 5W-30 C3 has intelligent molecules that cling, and form a self-healing layer so it’s always ready to protect at each of the critical stages of stop-start driving.
Castrol MAGNATEC STOP-START 5W-30 C3. Instant Protection From The Moment You Start. Every Time You Start.
*As tested in the industry OM646LA test
Castrol MAGNATEC STOP-START C3 5W-30 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN/CF or earlier specification 5W-30 lubricant. Castrol MAGNATEC STOP-START C3 is approved for use in vehicles from leading manufacturers please refer to the specifcations section and your owners handbook.
Castrol Magnatec MAGNATEC STOP-START C3 contains intelligent molecules that:
- Cling to engine parts when the oil drains down
- Form a self-healing layer to protect at each of the critical stages of stop-start driving and beyond
- Are proven to reduce wear in stop-start operation
|Castrol MAGANTEC STOP-START 5W-30 C3
|Density @ 15C, Relative
|Viscosity, Kinematic 100C
|Viscosity, CCS -30C (5W)
|Viscosity, Kinematic 40C
|Flash Point, PMCC
MB-Approval 229.31/ 229.51
Renault RN 0700 / RN 0710
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed to hot sun or freezing conditions.