Castrol Molub-Alloy Paste PL (previously named Optimol Paste PL) is especially suited for highly loaded sliding surfaces as well as for base and thin-film lubrication at high pressures and temperatures.

For larger surfaces and lubricating points with difficult access such as bore holes, threads and gear rims we recommend the use of Molub Alloy Paste PL Spray.

• For screw connections, press and snug fits at high temperatures up to + 600°C/+ 1112°F
• For sliding bearings, bushes and toothed wheels.
• On-drive trains in the automotive industry.
• For base lubrication of slideways, guides and joints.
• For good separation of tool and workpiece during hot shaping of metals.
• Temperature application range: – 30°C/- 22°F up to about + 450°C/+ 842°F (in case of reduced air supply up to +600°C/+ 1112°F)

Castrol Molub-Alloy Paste PL Advantages:

• Optitec – Molub-Alloy technology has a wide range of applications.
• Immediate lubricating effect.
• Easy spray application.
• Economical in use.
• Thermally stable.
• Excellent emergency running properties due to especially selected solid lubricants.
• Maximum load carrying capacity.
• Extremely low coefficient of friction.
• Good corrosion protection.
• Prevents fretting corrosion.
• Good adhesion and separation.
• Prevents stick-slip.

For Castrol Molub Alloy Paste PL:

• Clean surface.
• Apply a thin layer of Molub Alloy Paste PL with a brush or a lint-free cloth.
• Remove excess paste.

Only for paste-specific applications – cannot replace oil or grease lubrication. Please avoid mixing with other pastes,
greases or oils.

For Castrol Molub Alloy Paste PL Spray:

• Shake Molub-Alloy Paste PL Spray (article no. 08436) well before use.
• Hold can about 15 – 20 cm (6 to 8 inches) from the lubricating point to apply a thin and even layer of lubricant.

The product was previously named Optimol Paste PL. The name was changed in 2015

Contact Us 

Product Data Sheet 

Safety Data Sheet