Motor oil designed for turbocharged or naturally-aspirated Diesel engines meeting European standard Stage I and II (2002) and American standard EPA Tier 1 and 2.

It is recommended for mechanical transmissions fitted with oil bath brakes, hydraulic lift and assistance circuits, power take-offs and multidisc clutches operating in oil, and hydrostatic steering systems.

Its SAE 10W viscosity makes it fluid when cold, permitting easy engine starts at low temperatures and immediate efficiency of hydraulic filters guaranteeing shorter response time for hydraulic drive systems.

Outstanding anti-wear properties ensure a long life of the engine, transmission systems and hydraulic circuit components.

Anticorrosion and antirust properties to protect the non-ferrous metals and alloys in mechanical components.

Excellent anti-foaming qualities, to prevent any sump overflow or cavitation.

Completely inert to seals.

The use of specially refined base oils gives high resistance to oxidation, preventing the formation of deposits and glaze on parts operating at high temperature.

Special frictional characteristics ensure progressive, efficient and silent operation of brake and clutch systems.

Reduces fuel & oil consumption in engines thanks to the use of selected base oils.

TOTALMULTAGRI PRO-TEC10W-40 is designed for turbocharged or naturally-aspirated Diesel engines meeting European standard Stage I and II (2002) and American standard EPA Tier 1 and 2.

TOTAL MULTAGRI PRO-TEC 10W-40 is recommended for:

• Mechanical transmissions fitted with oil bath brakes
• Hydraulic lift and assistance circuits
• Power take-offs and multi-disc clutches operating in oil
• Hydrostatic steering systems

TOTAL MULTAGRI PRO-TEC 10 W-40 can be used in most old or new mechanical components of agricultural machinery simplifying lubricant supply and storage.

TOTAL MULTAGRI PRO-TEC 10W-40 exhibits lots of advantages and properties:

• Its SAE 10W viscosity makes it fluid when cold, permitting easy engine starts at low temperatures and immediate efficiency of hydraulic filters guaranteeing shorter response time for hydraulic drive systems
• Outstanding anti-wear properties ensure a long life of the engine, transmission systems and hydraulic circuit components
• Anticorrosion and antirust properties to protect the non-ferrous metals and alloys in mechanical components
• Excellent anti-foaming qualities, to prevent any sump overflow or cavitation
• Completely inert to seals
• The use of specially refined base oils gives high resistance to oxidation, preventing the formation of deposits and glaze on parts operating at high temperature
• Special frictional characteristics ensure progressive, efficient and silent operation of brake and clutch systems
• Reduces fuel & oil consumption in engines thanks to the use of selected base oils

Density at 15 °C – 864kg/m3
Kinematic Viscosity at 40 °C – 86.5 mm2/s
Kinematic Viscosity at 100 °C – 13.3 mm2/s
Viscosity Index – 155
Pour Point – -36°C

INTERNATIONAL CLASSIFICATIONS

ACEA E3

API CG-4

API GL-4

API SF

MANUFACTURERS SPECIFICATIONS

Approved:

CMS M1145

ZF TE-ML 06B

ZF TE-ML 07B

Meets the requirements of:

ALLISON C-4

CASE MS1206

CASE MS1207

CAT TO-2

CMS M1127A

CMS M1135

CMS M1139

CMS M1143

CMS M1144

FORD ESN-M2C-134-D

FORD FHNA-2-C-201.00

FORD WSS-M2C-159-B3

FORD WSS-M2C-86-A

JOHN DEERE JDM J20A

JOHN DEERE JDM J20C

JOHN DEERE JDM J27

Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out by the manufacturer’s recommendations. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet