Industrial Grease

Total Multis Complex SHD 00

VISCOSITY - ISO 460

Total Multis Complex SHD 00 Lubricating Grease

DESCRIPTION
Total MULTIS COMPLEX SHD 00 meets the lubrication requirements for very different types of equipment It slow traction coefficient makes it possible to anticipate energy gains and an increase in the service life of the bearings.
Miscible with most conventional soap greases (consult TOTAL Lubrifiants)
Very good water resistance, variations in temperature and pollution. Permits longer lubrication intervals
Total MULTIS COMPLEX SHD 00 contains no lead or any other heavy metal deemed harmful to human health or the environment
APPLICATIONS
  • Very high performance synthetic grease recommended for the lubrication of industrial applications under heavy loads and high temperature. More specially suitable in case lithium soap or conventional complex lithium soap do not provide sufficient lubricant life.
  • Offers excellent protection for bearings working under high loads and slow to moderate rotational speeds. Is suitable under wet conditions. Could be used in case of plastic contacts
  • Helps to reduce friction between metal and which is suitable in case of low temperature.
  • Recommended for temperatures between -50°C and +160°C.
ADVANTAGES
MULTIS COMPLEX SHD 00 Product Advantages:
  • Meets the lubrication requirements for very different types of equipment
  • Its slow traction coefficient makes it possible to anticipate energy gains and an increase in the service life of the bearings.
  • Miscible with most conventional soap greases (consult TOTAL Lubrifiants)
  • Very good resistance to water, variations in temperature and pollution. Permits longer lubrication intervals
  • Contains no lead or any other heavy metal deemed harmful to human health or the environment
TYPICAL CHARACTERISTICS
TYPICAL CHARACTERISTICS METHODSUNITSValue
Thickener

 

Complex Lithium
NLGI Grade

 

ASTM D 217/DIN 51 81800
Couleur

 

VisualYellow
Appearance

 

VisualSmooth
Temperature range

 

°C– 50 à 160
Penetration at 25°C

 

ASTM D 217/DIN51 8180.1 mm420 – 450
4-ball wear

 

DIN 51-350-T5mm0.37
4-ball EP

 

ASTM D2596Kgf500
SKF- EMCOR Antirust performances

 

DIN 51 802/IP220/NFT 60-135/ISO 11007cotation0 – 0
Base oil viscosity at 40°CASTM D 445/DIN 51 562-1/ISO 3104/IP71mm²/s (cSt)460
APPROVAL & PERFORMANCE CLAIMS
INTERNATIONAL CLASSIFICATIONS

MANUFACTURERS SPECIFICATIONS

Approved:
Meets the requirements of:
ADDITIONAL INFORMATION

Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us 

Product Data Sheet 

Total Multis Grease
PACK SIZES AVAILABLE
17Kg

Request a quote for this product