Total Multis Complex SHD 100
01736 757002VISCOSITY - ISO 100
Total Multis Complex SHD 100 Lubricating Grease
- Special complex lithium grease is designed for high-speed applications such as electric motors and fans where a long service life is required.
- Particularly developed for the lubrication of bearings working in extreme cold conditions. It is mechanically stable and still workable down to – 50°C and up to 160°C. It protects also bearings from fretting corrosion.
- Adapted for the lubrication in equipment under wet conditions and helps to reduce significantly friction between metal surfaces and hence reduce vibrations.
- Also suitable for lubricating thermoplastic materials.
- Recommended for temperatures between -50°C and +160°C.
Total Multis Complex SHD 100 Lubricating Grease Product Advantages:
- Meets the lubrication requirements for very different types of equipment.
- Its slow traction coefficient makes it possible to anticipate energy gains and an increase in the service life of the bearings.
- Miscible with most conventional soap greases (consult TOTAL Lubrifiants).
- Very good water resistance, variations in temperature and pollution. Permits longer lubrication intervals.
- MULTIS COMPLEX SHD 100 contains no lead or any other heavy metal deemed harmful to human health or the environment.
| TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
| Thickener
| – | Complex Lithium | |
| Grade NLGI
| ASTM D 217/DIN 51 818 | – | 2 |
| Colour
| Visual | – | Yellow |
| Appearance
| Visual | Smooth | |
| Temperature range
| °C | – 50 to +160 | |
| Penetration at 25 °C
| ASTM D 217/DIN51 818 | 0.1 mm | 265-295 |
| Penetration at -40°C
| NF T 60 171 mod. | 0.1 mm | > 160 |
| Low temperature Torque at -40°C
| ASTM D 1478 | mNm | |
| Starting torque | 383
| ||
| Running torque
| 51
| ||
| Mechanical stability P100,000 – P60
| ASTM D 217/DIN51 818 | 0.1 mm | 23 |
| Antirust performance
| ASTM D 1473 | Rating | pass |
| 4-ball weld load
| ASTM D 2596 | kgf | > 315 |
| 4-ball wear
| ASTM D 2266 | mm | 0,5 |
| Dropping point
| IP 396/NFT 60 102 C | °C | > 280 |
| Base oil viscosity at 40 °C | ASTM D 445/DIN 51 562-1/ISO 3104/ IP71 | mm²/s (cSt) | 100 |
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
