Total Nevastane EP 150
01736 757002VISCOSITY - ISO 150
Total Nevastane EP 150 Gear Oils, Suitable for Incidental Food Contact
Total Nevastane EP 150 gear oil is recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
Superior protection against high loads.
Adapted to a wide range of applications.
- NEVASTANE EP formulation is based on white mineral oils, synthetic oils, and high
performances additives provides excellent extreme-pressure, anti-wear and anti-oxidant
properties. - NEVASTANE EP oils are recommended for the lubrication of gear reducers, plain and roller
bearings with high loads in the food processing industries. - NEVASTANE EP oils are also suitable for the lubrication of numerous applications in the
food industry such as chains and conveyor belts.
Total Nevastane EP 150 gear oil, Suitable for Incidental Food Contact – Product Advantages:
- NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
- Superior protection against high loads.
- Adapted to a wide range of applications.
| TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
| Appearance | Visual | – | clear and bright liquid |
| Density @ 15°C | ISO 12185 | – | 873 |
| Kinematic viscosity @ 40 °C | ISO 3104 | mm2 /s | 150 |
| Kinematic viscosity @ 100 °C | ISO 3104 | mm2 /s | 16.06 |
| Viscosity Index (VI) | ISO 3104 | – | 112 |
| Flash point C.O.C. | ISO 2592 | °C | 254 |
| Pour point | ISO 3016 | °C | -15 |
- The formulation of NEVASTANE EP oils complies with the FDA chapter 21 CFR, 178.3570.
- NEVASTANE EP oils are NSF H1 registered:
NEVASTANE EP 100: No 146884 NEVASTANE EP 150: No 146886 NEVASTANE EP 220: No 146887
NEVASTANE EP 320: No 146888 NEVASTANE EP 460: No 146889 NEVASTANE EP 680: No 146891
NEVASTANE EP 1000: No 146885 - NEVASTANE EP oils are Kosher, Halal and ISO 21469 certified.
- ISO 12925-1 CKD (extended oil draining).
- DIN 51517-3 CLP.
- DIN 51554-2 – FZG (A/8, 3/90°C) – Fail stage > 12.
- ASTM D 4172 – 4 ball test – wear (scar diameter) – 0.3 mm.
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
