Castrol Perfecto X 32
VISCOSITY - ISO 32
Premium turbine lubricant
The Castrol Perfecto X turbine oil range of lubricants is based upon premium quality mineral oils enhanced with rust
and oxidation inhibitors to give maximum protection at high temperatures.
Castrol Perfecto X grades are recommended for industrial gas turbines where the lubricant is likely to be exposed to very
high localised temperatures. They are also suitable for the lubrication of steam turbines and Combined Cycle
generating systems where the steam and gas turbines share a common supply.
Castrol Perfecto X grades possess excellent air release performance, a high resistance to foaming and excellent water
Specific grades within the Perfecto X range meet or exceed the requirements of:
- BS 489: 1999
- DIN 51515 Part 1 (L-TD)
- DIN 51515 Part 2 (L-TG)
- General Electric
- GEK 32568k
- GEK 46506E
- GEK 107395A
- Alstom HTGD 90117
- Siemens TLV 9013 04
- Siemens TLV 9013 05
- High resistance to oxidation and thermal degradation provides a very long life lubricant because of low deposit/
- Excellent water separation and corrosion inhibition mean reduced down time through prolonged lubricant life
and increased equipment reliability.
- Excellent air release properties mean they meet the requirements of all turbine manufacturers.
- Suitable for the lubrication of both gas and steam turbines makes them applicable for Combined Cycle
|Viscosity||32 mm/s² at 40°C|
|Product type||Lubricating Oils|
|Applicable to these sectors||Chemicals, Machinery, Power Generation|
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to
avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60ºC,
exposed to hot sun or freezing conditions.