Castrol Rustilo™ DW 4130 is a soft film solvent deposited temporary corrosion preventive and dewatering fluid
formulated to give excellent long-term indoor protection.

Rustilo DW 4130 is used for protecting components previously exposed to water-containing machines and grinding
coolants, cleaners, or water rinses and also long term indoor protection of parts and components, which are stored
under humid conditions. Rustilo DW 4130 can be applied preferably by immersion, but if impractical, the fluid may be
applied by brushing or spraying.

• Based on solvent with aromatic content less than 10 ppm.
• Stable film characteristics reduce run-off loss and thus increase process reliability.
• Excellent long-term indoor protection.

• The claims on film thickness and consumption are average values. These are valid for smooth surfaces with good
  drain-off characteristics and simple geometries without holes or recesses.
• Average drying time is the time until the majority of the solvent is evaporated at ambient temperature and a relative
  humidity of 60 – 70%. The full corrosion protection will just be provided when the solvent is completely evaporated.
• “Indoor storage” describes the storage of ferrous components in closed store-rooms having a relative humidity of
  60%. Increased protection times could be achieved when treating finished surfaces or store the parts in a sealed
  pack.
• “Outdoor storage” describes open storage, which assumes primary protection from the elements by tarpaulin or
  other form of cover.
• Influence of temperature may cause some cloudiness, which is reversible and doesn’t have an impact on product
  quality.
• If required protective films of Rustilo DW 4130 can be removed by using a petroleum solvent or alkaline process
  cleaner, all available from Castrol.
• Approvals Rustilo DW 4130 is approved by the following organisations: • Cummins 102004 • Pratt & Whitney PMC 9119