Total Multagri Pro-tec 10w-40
VISCOSITY - SAE 10w-40
Total Multagri Pro-tec 10w-40 Agricultural SUTO Engine, Transmission & Hydraulic Oil
Motor oil designed for turbocharged or naturally-aspirated Diesel engines meeting European standard Stage I and II (2002) and American standard EPA Tier 1 and 2.
It is recommended for mechanical transmissions fitted with oil bath brakes, hydraulic lift and assistance circuits, power take-offs and multidisc clutches operating in oil, and hydrostatic steering systems.
Its SAE 10W viscosity makes it fluid when cold, permitting easy engine starts at low temperatures and immediate efficiency of hydraulic filters guaranteeing shorter response time for hydraulic drive systems.
Outstanding anti-wear properties ensure a long life of the engine, transmission systems and hydraulic circuit components.
Anticorrosion and antirust properties to protect the non-ferrous metals and alloys in mechanical components.
Excellent anti-foaming qualities, to prevent any sump overflow or cavitation.
Completely inert to seals.
The use of specially refined base oils gives high resistance to oxidation, preventing the formation of deposits and glaze on parts operating at high temperature.
Special frictional characteristics ensure progressive, efficient and silent operation of brake and clutch systems.
Reduces fuel & oil consumption in engines thanks to the use of selected base oils.
TOTALMULTAGRI PRO-TEC10W-40 is designed for turbocharged or naturally-aspirated Diesel engines meeting European standard Stage I and II (2002) and American standard EPA Tier 1 and 2.
TOTAL MULTAGRI PRO-TEC 10W-40 is recommended for:
- Mechanical transmissions fitted with oil bath brakes
- Hydraulic lift and assistance circuits
- Power take-offs and multi-disc clutches operating in oil
- Hydrostatic steering systems
TOTAL MULTAGRI PRO-TEC 10 W-40 can be used in most old or new mechanical components of agricultural machinery simplifying lubricant supply and storage.
TOTAL MULTAGRI PRO-TEC 10W-40 exhibits lots of advantages and properties:
- Its SAE 10W viscosity makes it fluid when cold, permitting easy engine starts at low temperatures and immediate efficiency of hydraulic filters guaranteeing shorter response time for hydraulic drive systems
- Outstanding anti-wear properties ensure a long life of the engine, transmission systems and hydraulic circuit components
- Anticorrosion and antirust properties to protect the non-ferrous metals and alloys in mechanical components
- Excellent anti-foaming qualities, to prevent any sump overflow or cavitation
- Completely inert to seals
- The use of specially refined base oils gives high resistance to oxidation, preventing the formation of deposits and glaze on parts operating at high temperature
- Special frictional characteristics ensure progressive, efficient and silent operation of brake and clutch systems
- Reduces fuel & oil consumption in engines thanks to the use of selected base oils
Density at 15 °C – 864kg/m3
Kinematic Viscosity at 40 °C – 86.5 mm2/s
Kinematic Viscosity at 100 °C – 13.3 mm2/s
Viscosity Index – 155
Pour Point – -36°C
INTERNATIONAL CLASSIFICATIONS
ACEA E3
API CG-4
API GL-4
API SF
MANUFACTURERS SPECIFICATIONS
Approved:
CMS M1145
ZF TE-ML 06B
ZF TE-ML 07B
Meets the requirements of:
ALLISON C-4
CASE MS1206
CASE MS1207
CAT TO-2
CMS M1127A
CMS M1135
CMS M1139
CMS M1143
CMS M1144
FORD ESN-M2C-134-D
FORD FHNA-2-C-201.00
FORD WSS-M2C-159-B3
FORD WSS-M2C-86-A
JOHN DEERE JDM J20A
JOHN DEERE JDM J20C
JOHN DEERE JDM J27
Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out by the manufacturer’s recommendations. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.