Total Traxium Axle 8 80w-90
01736 757002VISCOSITY - SAE 80w-90
Total Traxium Axle 8 80w-90 Transmission Oil
Total Traxium Axle 8 80w-90 Transmission Oil Product Advantages:
- Reduced cost of maintenance: specially formulated to reach the drain intervals recommended by the manufacturer.
- Improved protection of axles against wear and corrosion due to extreme-pressure properties of oil.
- Improved driver start up experience: low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption.
- Improved stability in operation due to high viscosity index
- High compatibility with oil filters due to antifoam properties
- Specifically designed for vehicles with 4WD
| TYPICAL CHARACTERISTICS | UNITS | METHODS | Value |
| Volumetric mass at 15°C | kg/m 3 | DIN 51757 D | 896 |
| Viscosity at 40°C | mm 2 /s | ASTM D445 | 138 |
| Viscosity at 100°C | mm 2 /s | ASTM D445 | 18 |
| Viscosity index | – | ASTM D2270 | 145 |
| Viscosity Brookfield at -26°C | mPa/s | – | 43 000 |
| Flash point | °C | ASTM D92 | 218 |
| Pour point | °C | ASTM D97 | -33 |
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
